If you're planning to install acoustic panels to improve your room’s sound quality, you might be wondering — will they make the room hotter? This is a common concern, especially in home studios, offices, or living spaces where comfort matters just as much as acoustics.

The good news is: acoustic panels don’t significantly raise room temperature — especially when you choose the right materials and installation methods.

As one of the leading manufacturers and exporters of wood slat acoustic panels in China, Guangdong Leeyin Acoustics is here to break it down for you with expert insights and facts.

---

🔍 Do Acoustic Panels Trap Heat?

In general, acoustic panels are not designed to insulate heat like thermal insulation materials. However, because they cover wall or ceiling surfaces, they may reduce airflow if your room relies heavily on wall-mounted ventilation.

That said, the impact is minimal and barely noticeable—especially when using Leeyin's wooden slat PET acoustic panels, which are:

• Lightweight

• Breathable

• Engineered for sound absorption, not thermal insulation

---

🪵 Why Leeyin Panels Are Temperature-Neutral

At Leeyin Acoustics, we design our panels with both acoustic performance and material balance in mind:

✅ Materials That Don’t Trap Heat

• Recycled PET felt backing: Breathable and moisture-resistant

• E0 MDF slats: Engineered to remain dimensionally stable without affecting temperature

• Open slat design: Allows air movement and doesn't seal off entire surfaces like foam or fiberglass might

✅ Optimized for Airflow

Unlike thick foam blocks that can reduce ventilation, our slatted designs allow natural airflow while maintaining superior sound absorption.

---

🏠 Real-World Use: Do Customers Notice a Temperature Change?

Most Leeyin customers across residential, commercial, and studio installations report no noticeable temperature difference after panel installation. As long as your room has proper ventilation, HVAC, or airflow, the panels won’t affect the ambient temperature.

---

🌿 Bonus: Thermal Benefits in Some Cases

In some environments, acoustic panels may slightly improve thermal comfort by:

• Reducing wall surface temperature fluctuations

• Preventing cold echo from bare walls in winter

• Adding minor thermal resistance, particularly on exterior-facing walls

But again, this effect is secondary and not the primary function of acoustic panels.

---

🏭 Why Trust Guangdong Leeyin Acoustics?

As a trusted leader in wood slat acoustic panel manufacturing, we bring:

• A 20,000㎡ modern production base

• Certified E0 & FSC materials for health and sustainability

• Advanced quality control under international management systems

• Global export experience, especially in Europe, North America, and the Middle East

 

Whether you're designing a studio, office, cinema, or home interior, Leeyin panels deliver style, sound control, and comfort—without overheating your space.

When it comes to creating the perfect acoustic environment—whether in a recording studio, office, or living space—installing acoustic panels is one of the most effective ways to improve sound quality. But a common question we hear is:
Does it matter where you put acoustic panels?

The answer is a definite yes.

As a leading manufacturer and exporter of wood slat acoustic panels, Guangdong Leeyin Acoustics has helped thousands of clients worldwide design sound-optimized spaces. In this blog post, we’ll explore why panel placement matters, how to find optimal positions, and what to consider when planning your acoustic treatment.

---

🎯 Why Panel Placement Is Critical

Acoustic panels work by absorbing sound reflections that bounce off hard surfaces. Poor placement can result in:

• Minimal improvement in sound quality

• Lingering echoes or reverb

• Uneven sound across the room

Properly placed panels target first reflection points, flutter echo zones, and standing wave hotspots—dramatically improving acoustic comfort and clarity.

---

📌 Where Should You Put Acoustic Panels?

✅ 1. First Reflection Points (Walls & Ceiling)

These are the surfaces where sound waves reflect directly from the source (e.g., speakers) to your ears. Treating these areas reduces early reflections and increases sound clarity.

Use the mirror trick:
Sit in the listening position, and have someone move a mirror along the wall. Wherever you can see the speaker from your seat, mark that point. That’s a first reflection spot.

✅ 2. Opposing Walls (Flutter Echo Zones)

When two parallel walls reflect sound back and forth, flutter echo can occur. Placing acoustic panels on both opposing walls helps eliminate this harsh, repetitive sound.

✅ 3. Rear Wall (Bass Traps & Panels)

In home theaters and studios, the back wall is prone to low-frequency buildup. Thicker acoustic panels or bass traps can be installed here to control boomy bass and improve sound balance.

✅ 4. Ceiling (Especially in Small Rooms or Studios)

Often overlooked, the ceiling can be a major reflection surface. Mounting acoustic panels above the listening area—known as a cloud panel—can significantly reduce vertical sound reflections.

✅ 5. Corners (Low-Frequency Absorption)

Corners tend to trap bass frequencies. Although not always suitable for standard wall panels, custom corner panels or bass traps can be very effective.

---

🚫 Where Not to Put Panels

Avoid installing acoustic panels:

• In places with no sound reflection or interaction

• Too low to the ground (where sound rarely travels directly)

• Randomly scattered—this reduces overall effectiveness

Proper acoustic planning is always more efficient than over-installing panels.

---

🪵 Why Choose Wood Slat Acoustic Panels?

At Guangdong Leeyin Acoustics, we specialize in high-performance wood slat acoustic panels backed with eco-friendly PET felt. These panels are not only effective in sound absorption, but also enhance the aesthetics of your room.

Key benefits:

• Suitable for both walls and ceilings

• Available in various finishes and thicknesses

• Made with FSC-certified wood

• Easy to install with screw, clip, or adhesive systems

---

🏭 Our Expertise at Leeyin Acoustics

With over 20,000㎡ of modern production facilities, Leeyin Acoustics leads the way in acoustic innovation and design.

 

✅ Industry-Leading Exporter in China
✅ Over 10 years of experience in the global acoustic panel market
✅ Strict quality control according to international standards
✅ Custom solutions for architects, designers, and contractors

 

 

Soundproofing is often associated with costly renovations and specialized materials, but the truth is—you don’t need to break the bank to make a room quieter. Whether you’re dealing with noisy neighbors, street sounds, or echo inside your space, there are budget-friendly soundproofing methods that can make a noticeable difference.

At Guangdong Leeyin Acoustics, we’ve helped clients worldwide improve their acoustic environments using wood slat wall panels and acoustic panels—all while keeping cost-effectiveness in mind. In this post, we’ll explore the most affordable ways to soundproof a room and explain why professional acoustic products can be a smart long-term investment.

---

💡 Low-Cost Soundproofing Solutions

1. Use Rugs and Carpets

Bare floors reflect sound, making rooms echo and feel noisy. A thick rug or carpet can absorb impact noise and reduce sound reflection, especially in rooms with hardwood, tile, or concrete floors.

2. Seal Gaps and Cracks

Sound travels easily through small openings. Use weatherstripping, acoustic caulk, or even DIY foam strips around doors and windows to reduce noise leaks. This step is inexpensive but highly effective.

3. Hang Heavy Curtains

Thick, insulated curtains (sometimes called soundproof curtains) can help reduce outside noise coming through windows. While they won’t block all sound, they can make a noticeable difference.

4. Rearrange Furniture

Placing bookshelves, wardrobes, or large furniture against shared walls can help block sound from adjacent rooms or apartments. It’s a simple, zero-cost trick that uses what you already own.

5. Add Soft Furnishings

The more soft surfaces in your room, the less sound will bounce around. Add cushions, upholstered chairs, or even fabric wall hangings to absorb noise.

---

🎯 Why Acoustic Panels Are a Smart Investment

While DIY methods can help, they have limitations. If you want long-term, high-performance soundproofing, acoustic panels—especially wood slat acoustic panels—offer better absorption, durability, and style.

At Guangdong Leeyin Acoustics, our wood slat wall panels are backed with eco-friendly PET felt, providing excellent sound absorption while enhancing your interior design. Unlike temporary DIY solutions, they are:

• Highly effective at reducing echo and improving clarity

• Durable and long-lasting (life expectancy over 10 years)

• Customizable in color, size, and finish

• Easy to install on both walls and ceilings

---

🏭 Our Expertise at Leeyin Acoustics

With over 20,000㎡ of modern production facilities, Guangdong Leeyin Acoustics is one of China’s leading exporters of wood slat wall panels and acoustic panels.

 

• ✅ Global market leader in acoustic wall panel manufacturing

• ✅ Strict quality control in line with international standards

• ✅ Custom solutions for architects, designers, and contractors

• ✅ Environmentally friendly materials meeting E0 and FSC certifications

When designing an acoustically treated space—whether it’s a home studio, office, theater, or residential interior—acoustic panels play a vital role in controlling sound reflections, echo, and reverberation. One common question we receive is:
“Should acoustic panels be installed vertically or horizontally?”

As a leading Chinese manufacturer and exporter of wooden slat acoustic wall panels, Guangdong Leeyin Acoustics Technology Co., Ltd. is here to guide you through this important design decision with both technical insight and aesthetic consideration.

---

🔍 The Short Answer

Both vertical and horizontal installations are effective, but the best orientation depends on:

• Room size and shape

• Primary sound reflection points

• Aesthetic goals

• Type of space (e.g., home studio vs. living room)

Let’s break it down.

---

📐 Acoustic Considerations: Vertical vs. Horizontal

✅ Vertical Installation

Best for: Narrow walls, high ceilings, speech clarity

• Helps absorb reflections at ear level (important in offices, meeting rooms, and studios)

• Breaks up vertical sound waves traveling from floor to ceiling

• Enhances room height perception and symmetry

• Ideal placement behind speakers or workstations

Vertical panels are particularly useful in conference rooms, classrooms, and podcast setups where speech intelligibility matters.

✅ Horizontal Installation

Best for: Large open spaces, low ceilings, home cinemas

• Helps reduce flutter echoes between long walls

• Adds a balanced, linear visual effect to wide rooms

• Ideal for absorbing lateral reflections in home theaters, recording studios, and lounge areas

Horizontal orientation can also emphasize the room’s width, contributing to a more relaxed or modern aesthetic.

---

🛠️ Functional Tip: Mix Both Orientations

For optimal acoustic performance, a combination of vertical and horizontal panels is often recommended—especially in larger or irregularly shaped rooms.

• Vertically placed panels can target speech and direct reflections

• Horizontally placed panels help break up long wall surfaces and tackle mid- to high-frequency reverberation

---

🪵 Aesthetic Flexibility with Leeyin Panels

At Liyin Acoustics, our wooden slat acoustic panels are not just acoustically effective—they’re visually stunning. With multiple wood veneers, PET backing colors, and customizable lengths, they can be mounted vertically or horizontally with ease.

Why Our Panels Stand Out:

• 🌱 Made from FSC-certified wood veneer

• 🛡️ Manufactured using E0-grade MDF—safe, low formaldehyde

• 🔥 Fire-resistant and environmentally friendly

• 🛠️ Easy to cut, install, and maintain

• 🎨 Compatible with both vertical and horizontal designs

---

🏭 About Guangdong Leeyin Acoustics

As a pioneer in acoustic wall solutions, Guangdong Liyin Acoustics Technology Co., Ltd. has a:

 

• 💼 20,000 m² modern manufacturing facility

• 🌍 Strong export presence in Europe, North America, and Southeast Asia

• 🔧 Strict adherence to international quality standards (ISO, FSC, SGS)

• 💡 Specialized focus on wooden slat acoustic panels for both commercial and residential applications

When it comes to improving sound quality in a room—whether it’s an office, studio, home theater, or commercial space—acoustic panels are an essential solution. But one of the most common questions we hear is:
“Should acoustic panels go on the walls or the ceiling?”

The short answer? Both can be effective depending on your acoustic goals. In this blog post, we’ll explore the differences, benefits, and ideal placements of acoustic panels—especially our signature wood slat acoustic panels from Guangdong Liyin Acoustics Technology Co., Ltd.

---

✅ Wall-Mounted Acoustic Panels

📌 Why Install Acoustic Panels on Walls?

• Primary reflection points: Walls are often the first surfaces where sound waves bounce, creating echoes and muddying audio clarity.

• Improved speech intelligibility: Reducing side wall reflections makes spoken words more crisp and clear—essential in offices and meeting rooms.

• Ideal for small to medium-sized rooms: Most sound reflections occur horizontally in typical spaces.

✔ Best Placement on Walls:

• At ear level in seating positions

• Behind or beside speakers

• On opposite walls for balanced absorption

---

✅ Ceiling-Mounted Acoustic Panels

📌 Why Install Acoustic Panels on Ceilings?

• Tackling vertical reflections: Ceilings reflect sound waves just like walls, especially in large rooms with high ceilings.

• Open spaces benefit most: Conference rooms, restaurants, and atriums often require overhead absorption to reduce ambient noise.

• Better low-frequency control: Hanging baffles or ceiling clouds can improve low-end absorption and reduce flutter echo.

✔ Best Ceiling Applications:

• Above central seating areas

• Suspended panels (clouds) for visual effect + sound control

• In open-plan offices or multi-functional public spaces

---

🪵 Why Choose Liyin’s Wood Slat Acoustic Panels?

At Guangdong Liyin Acoustics Technology Co., Ltd.( Leeyin ) , we design and manufacture premium wood slat acoustic panels with PET backing—ideal for both wall and ceiling installations.

💼 Our Core Advantages:

• 🔧 Versatile Application – Easily mounted on walls or ceilings with screws, glue, or mounting rails

• 🌿 Eco-Friendly Materials – Made with PET felt, E0 MDF, and FSC-certified wood veneer

• 🔥 Fire-Rated & Formaldehyde-Free – Meets international safety standards

• 🏢 20,000 m² Production Facility – Backed by modern equipment and efficient logistics

• 🌍 Global B2B Supplier – Exported to Europe, North America, Southeast Asia, and more

• 🛠️ OEM/ODM Services – Custom sizes, colors, and finishes for your project needs

Whether you're treating a recording studio wall or creating a stylish sound-absorbing ceiling feature in a hotel lobby, our acoustic panels are engineered for aesthetics and performance.

---

🎯 Final Takeaway: Walls, Ceilings… or Both?

The best acoustic treatment strategy considers both surfaces. Start with walls for first reflections, then consider ceilings for additional control—especially in large or open rooms.

 

Liyin Acoustics panels are engineered to perform beautifully on either surface, allowing you to create an environment that both sounds and looks exceptional.

 

Soundproofing a room completely—blocking all unwanted noise from entering or escaping—is a significant challenge. While achieving absolute 100% soundproofing requires extensive construction-level adjustments, you can get impressively close with the right materials, techniques, and product choices.

At Guangdong Liyin Acoustics Technology Co., Ltd. ( Leeyin ) , we specialize in wood slat acoustic panels and deliver effective sound solutions to clients worldwide. In this guide, we’ll walk you through how to soundproof a room as completely as possible, whether for a studio, office, or private space.

---

🔍 Understanding True Soundproofing

Soundproofing is different from sound absorption. Soundproofing blocks sound, while acoustic treatment improves sound quality inside the room.

To soundproof a room, you must address all sound pathways:

• Airborne sound (voices, music)

• Impact sound (footsteps, vibrations)

• Structural transmission (through walls, floors, ceilings)

---

✅ 1. Seal All Air Gaps

Even the smallest gaps let sound leak in or out. Start by sealing:

• Door frames: Use door sweeps and rubber seals

• Window edges: Apply acoustic caulk or double-glazed windows

• Outlets and vents: Cover with soundproofing gaskets or acoustic putty pads

🔧 Use acoustic caulk to seal all perimeter gaps for added noise isolation.

---

✅ 2. Upgrade Your Walls

Typical drywall transmits sound easily. To soundproof walls:

• Add mass: Use mass loaded vinyl (MLV) or multiple layers of drywall with Green Glue (a damping compound)

• Use decoupling techniques: Install resilient channels or staggered studs

• Install high-density acoustic panels, like our PET-backed wood slat acoustic panels for added absorption and diffusion

👉 Liyin Acoustics' slat wall panels not only enhance aesthetics but contribute to a multi-layered acoustic barrier.

---

✅ 3. Reinforce Doors & Windows

Standard doors and windows are weak spots.

• Replace hollow-core doors with solid-core doors

• Install double or triple-glazed windows

• Use soundproof curtains or acoustic window inserts

---

✅ 4. Soundproof the Ceiling

To prevent noise from above:

• Add acoustic insulation between ceiling joists

• Use acoustic ceiling panels or suspended ceiling systems

• Install wooden acoustic ceiling panels from Liyin Acoustics for both style and performance

---

✅ 5. Treat the Floors

To block footstep noise and vibration:

• Lay carpet with dense underlay

• Use soundproofing mats or cork/rubber flooring

• Seal baseboards with acoustic sealant

---

✅ 6. Add Absorption Materials

To control echo and improve internal acoustics:

• Install Liyin’s wood slat acoustic panels

• Use fabric acoustic panels, bass traps, or corner diffusers

• Add acoustic foam in key reflection points

---

🌿 Why Choose Liyin Acoustics?

Guangdong Liyin Acoustics Technology Co., Ltd. is a global leader in manufacturing high-quality wood slat acoustic panels for soundproofing and acoustic treatment.
Here’s why businesses around the world trust us:

✅ Over 20,000㎡ modern production facility
✅ Specializing in E0 MDF + PET felt wall panels
✅ FSC-certified, recyclable, and sustainable materials
✅ OEM/ODM customization available
✅ Strict international quality management
✅ Exporting to Europe, North America, Southeast Asia, and beyond

 

Our PET-backed wood panels offer excellent sound absorption, enhance visual appeal, and support eco-friendly construction.

Everything You Need to Know for Better Soundproofing

When planning a soundproofing or acoustic treatment project—especially for studios, offices, or commercial interiors—you’ve likely heard about acoustic caulk. But is it really worth the investment?

At Guangdong Liyin Acoustics Technology Co., Ltd. ( Leeyin ) , we specialize in high-performance wood slat acoustic panels and understand the importance of every element in achieving effective sound control. Let’s explore whether acoustic caulk is a must-have, and how it fits within your overall soundproofing strategy.

---

✅ What Is Acoustic Caulk?

Acoustic caulk—also known as acoustic sealant—is a flexible, sound-dampening material used to seal gaps, cracks, and seams where sound might leak through. Unlike traditional caulk, acoustic sealants remain flexible and non-hardening over time, preventing sound vibrations from transferring through structural gaps.

---

🎯 Does Acoustic Caulk Really Work?

Yes—when used correctly, acoustic caulk plays a crucial role in soundproofing by:

• Sealing air gaps between wall panels, doors, windows, and outlets

• Preventing sound leakage through seams and joints

• Enhancing the effectiveness of soundproofing materials like acoustic panels and insulation

It won’t block sound by itself—but it significantly improves the overall performance of your acoustic treatment.

---

💡 Where Should You Apply Acoustic Caulk?

For maximum effect, apply acoustic caulk in:

• Gaps between walls and floors

• Around window frames and door trims

• Along baseboards and wall panel joints

• Around electrical outlets and switch boxes

• Edges of acoustic panel installations

Pairing caulk with high-quality acoustic materials—like our PET-backed wooden slat panels—creates a comprehensive sound barrier.

---

💰 Is Acoustic Caulk Worth the Cost?

Absolutely—and here’s why:

• Affordable price point: Compared to heavy-duty soundproofing materials, acoustic caulk is low cost

• High ROI: A tube of caulk may cost under $20 but could drastically improve noise isolation

• Essential for detailed work: Especially in recording studios, home theaters, and conference rooms, tiny gaps can ruin an otherwise perfect acoustic setup

---

🌿 A Perfect Match with Sustainable Acoustic Panels

At Liyin Acoustics, we’re committed to delivering high-performance eco-friendly acoustic solutions:

• PET felt backing made from recycled materials

• E0-grade MDF (low formaldehyde emission)

• FSC-certified wood for sustainable sourcing

• NRC ratings up to 0.85+ for outstanding acoustic performance

When installing our wooden slat acoustic panels, using acoustic caulk helps seal edges and maximize acoustic insulation, especially in professional spaces.

---

🔧 Easy to Install with Liyin Panels

 

All Liyin acoustic panels are designed for quick, user-friendly installation. Combine our panels with acoustic caulk, adhesive glue, or screw mounting systems for strong, durable, and clean results.

When designing a professional or home recording studio, sound quality is everything. But achieving clear, balanced acoustics starts with the right materials — and that includes choosing the correct size of acoustic panels.

At Guangdong Liyin Acoustics Technology Co., Ltd.  ( Leeyin ) , we are one of China’s leading manufacturers and exporters of wood slat acoustic panels, with global clients in Europe, North America, Southeast Asia, and beyond. Our products are engineered not only for aesthetics and sustainability but also to meet professional acoustic demands.

So, what size acoustic panels are best for a studio? Let’s dive in.

---

📏 Standard Acoustic Panel Sizes for Studios

Studio acoustic panels come in a variety of sizes depending on their function, placement, and material. However, certain dimensions are commonly used across the industry.

✅ Common Acoustic Panel Sizes:

• 600mm × 600mm (24" × 24") – Compact and versatile. Ideal for ceilings or small wall sections.

• 600mm × 1200mm (24" × 48") – A popular choice for wall installations, offering a larger coverage area.

• 600mm × 2400mm (24" × 94") – Perfect for full-height applications and stylish vertical designs, especially in control rooms or vocal booths.

• Custom sizes – At Liyin Acoustics, we offer custom lengths and widths to suit large studios, music production suites, or commercial recording spaces.

---

🎵 Why Size Matters in Studio Acoustic Treatment

Choosing the right panel size affects:

• Coverage Area – Larger panels cover more surface, reducing reflections and flutter echo more efficiently.

• Design Flexibility – Custom sizes allow seamless integration into walls, corners, and ceilings.

• Performance – Larger panels often provide better broadband absorption, especially when used with PET backing and MDF slats.

---

🧱 Our Product: PET+MDF Wood Slat Acoustic Panels

At Liyin Acoustics, our wooden slat acoustic panels are specially crafted for high-end acoustic performance and beautiful aesthetics.

🌟 Specifications:

• Standard Size: 600mm x 2400mm (cuttable and extendable)

• Thickness: 21mm (12mm MDF + 9mm PET felt)

• Backing Material: 100% recyclable PET felt

• Slats: E0-grade MDF with natural wood veneer

• Certifications: FSC-certified, EN13501 fire rating, and low formaldehyde (E0 Standard)

These dimensions strike the perfect balance between performance, elegance, and ease of installation — making them ideal for professional and home studios alike.

---

🛠️ Custom Sizes & OEM Services

Need something unique? We offer OEM/ODM services for bulk orders. Whether you're outfitting a large-scale studio or working on an interior design project, we can create the exact size, color, and finish that fits your acoustic and design needs.

---

📦 Quick Tip: How Many Panels Do You Need?

As a rough guide:

• Small home studio (10–12m²): 6–8 panels of 600×1200mm

• Medium studio (15–20m²): 10–12 panels

• Large control room or vocal booth: 14+ panels with bass traps and ceiling clouds

Want to estimate it precisely? We can help with a free layout suggestion based on your room dimensions.

---

Why Choose Guangdong Liyin Acoustics?

• ✅ 20,000 m² modern manufacturing facility

• ✅ Strict quality control per international standards

• ✅ Eco-friendly materials with low VOC emissions

• ✅ Global exports with fast lead times

• ✅ Trusted by clients in architectural, commercial, and recording industries

 

From design to delivery, Liyin Acoustics is your trusted B2B partner for acoustic innovation.

Creating a professional-grade home studio isn't just about your microphone, DAW, or monitors — it’s also about controlling how sound behaves in the space. One of the most important elements of studio treatment is strategic acoustic panel placement.

 

At Guangdong Liyin Acoustics Technology Co., Ltd. ( Leeyin ) , we specialize in producing premium wood slat acoustic panels for sound absorption and interior design. As a leading manufacturer and exporter in China, we understand how proper acoustic treatment transforms a space — especially in home studios.

Let’s dive into the best spots to place acoustic panels in a home studio to achieve clear, balanced sound.

---

🎯 Why Panel Placement Matters

Acoustic panels absorb sound waves — especially mid and high frequencies — preventing echo, flutter, and uneven reflections. But for effective results, placement is everything.

Randomly placing panels will have little effect. Correct positioning, however, can drastically improve:

• Vocal clarity

• Mixing accuracy

• Bass response

• Overall acoustic comfort

---

🎧 Ideal Locations to Place Acoustic Panels in Your Home Studio

1. First Reflection Points (Side Walls)

These are the spots where sound from your monitors first bounces off the walls before reaching your ears.

✅ Solution:
Place wood slat acoustic panels on the left and right side walls at the same height as your monitor speakers. Use the “mirror trick” to locate these reflection points easily.

---

2. Front Wall (Behind the Monitors)

Though often overlooked, the wall directly behind your monitors can reflect powerful early sound waves.

✅ Solution:
Install 2–3 vertical acoustic panels behind your speakers. Our PET-backed wood slat panels not only absorb sound effectively but also enhance the aesthetic of your studio.

---

3. Back Wall (Behind Your Listening Position)

The rear wall is critical. Without treatment, sound reflections from this wall can interfere with what you hear.

✅ Solution:
Cover the center of the back wall with a broadband absorber or a few of our wide-format acoustic panels. This helps reduce standing waves and flutter echo.

---

4. Ceiling (Above Listening Area)

Ceiling reflections (aka “cloud reflections”) can be just as problematic as wall reflections.

✅ Solution:
Mount acoustic panels or “acoustic clouds” directly above your mixing position. Our lightweight PET felt-based panels are easy to install overhead.

---

5. Corners (Low-End Control)

Bass tends to accumulate in corners, creating muddy and inaccurate low-end.

✅ Solution:
While our panels are designed for mid-high frequency absorption, pairing them with bass traps in corners will give you a full-range treatment.

---

💡 Pro Tip: Symmetry is Key

Try to maintain symmetry in panel placement. If one panel goes on the left, place a matching one on the right. This creates a balanced stereo image — crucial for mixing and mastering.

---

Why Choose Liyin Acoustics Panels for Home Studios?

At Guangdong Liyin Acoustics Technology Co., Ltd., we don’t just offer panels — we deliver performance, precision, and design.

🛠️ Key Benefits:

• ✅ Sound-absorbing PET felt with E0 MDF wood slats

• ✅ FSC-certified, eco-friendly materials

• ✅ Class B fire resistance (EN 13501)

• ✅ Custom lengths, colors, and finishes available

• ✅ OEM & ODM support for bulk B2B orders

• ✅ Fast production and global logistics from our 20,000m² facility

 

Whether you’re a bedroom producer or running a professional vocal booth, our panels help you create a cleaner, quieter, and more accurate listening space.

 

A Practical Guide – and When to Consider Professional Alternatives

In today’s increasingly noisy environments—whether it's a home office, recording studio, or commercial space—acoustic treatment has become essential. One popular question we hear is:
“Can I build my own acoustic panels?”

Yes, you can. But is it the best choice for your space and project needs? In this blog, we’ll explore how to build DIY acoustic panels and why many B2B professionals and design teams ultimately choose high-quality factory-made panels like those from Guangdong Liyin Acoustics Technology Co., Ltd. (Leeyin) 

---

🛠️ DIY Acoustic Panels: Materials You’ll Need

To build a basic acoustic panel at home, gather the following:

• Wood frame (1” x 4” lumber works well)

• Sound-absorbing core: Rockwool, Owens Corning 703, or acoustic foam

• Fabric covering: Breathable, acoustically transparent fabric

• Staple gun or adhesive

• Screws and wall mounts

Optional:

• Backing material like felt or burlap

• Fire retardant treatment (essential for safety)

---

🧱 Step-by-Step DIY Panel Construction

1. Build the Frame
   Cut and screw together your wood planks into a rectangular frame (typically 24” x 48”).

2. Insert the Insulation Core
   Place mineral wool or acoustic insulation inside the frame. Ensure it fits snugly to prevent movement.

3. Wrap with Fabric
   Stretch fabric tightly over the frame and staple it along the back. Be sure the fabric allows sound to pass through (avoid vinyl or plastic).

4. Seal and Mount
   Add backing if desired, and attach D-rings or mounting brackets. Mount panels at ear-level reflection points for best effect.

---

🧩 Pros and Cons of DIY Acoustic Panels

---

🔍 Why Many B2B Clients Prefer Ready-Made Panels

At Guangdong Liyin Acoustics Technology Co., Ltd., we understand the value of both cost-effectiveness and professional-grade results. While DIY panels might work for hobbyists, B2B customers often require:

• Certified acoustic performance (NRC-rated)

• Fire resistance & eco-friendly materials

• Design consistency across large projects

• Fast lead times and expert support

Our PET felt-backed wood slat acoustic panels combine style, sound absorption, and easy installation, making them ideal for architects, contractors, interior designers, and commercial developers.

---

🌟 Why Choose Liyin Acoustics?

With over 20,000 m² of modern manufacturing space and exports to Europe, North America, Southeast Asia, and more, Liyin Acoustics is one of China’s leading manufacturers of acoustic wall panels.

We offer:

✅ Custom OEM/ODM acoustic solutions
✅ Global shipping & logistics support
✅ PET-backed wood slat panels for optimal acoustic performance
✅ Durable materials meeting international quality standards
✅ Elegant finishes that elevate any space

---

🧠 Final Thoughts: DIY or Professional?

DIY panels can be a fun and educational project—but for lasting results in commercial or high-end residential settings, professionally manufactured acoustic panels are often more cost-effective over time.

 

Want a hassle-free, certified, and beautiful acoustic solution?
Trust the experts at Guangdong Liyin Acoustics Technology Co., Ltd.